Medium Force Shakers
V8 Electrodynamic Shaker
V8 Electrodynamic Shaker - Rated for Force Levels up to 66 kN (14800 lbf)
The V8 vibration test system offers the highest achievable envelope of vibration test parameters for an electrodynamic shaker, ensuring maximum displacement, velocity and force are all available together, thus maximising test equipment usage. The large 640 mm diameter armature and lightweight 'high g' 440 mm armature both provide an optimal combination of strength, low mass and dynamic performance.
Sine Force peak
60 kN (13,489 lbf) for 440 mm armature
57.8 kN (13,000 lbf) for 640 mm armature
Random Force rms
66 kN (14,837 lbf) for 440 mm armature 55.6 kN (12,500 lbf) for 640 mm armature
Shock Force
198 kN (44,511 lbf) for 440 mm armature
Acceleration
140 gn for 440 mm armature
Velocity
1.8 m/s (70.9 in/sec) peak
(2.0 m/s half field power)
Displacement
63.5 mm (2.5 inch) peak-peak continuous displacement on either armature as standard
Features
- High 'g' vibration test equipment with lightest armatures in class
- Industry-leading displacement and peak velocity performance, making the V8 the ideal system for shock and vibration tests
- No expensive seismic masses needed for the vibration table thanks to superb isolation from 'Lin-E-Air' suspension
- Low installation cost due to integrated field power and blower supplies
- No electrical limit on performance for low-frequency vibration control
- Test loads of up to 700kg with integral load support, higher loads with external support
- Ultra-quiet running possible with 'squeak and rattle' variant
